Forum

Lawn mower blades wear down and need to be replaced often to ensure that your lawn looks its best. It's easy to change the blades. It is all you need are a few basic tools and a few steps.

The top lawn mower blades have solid construction materials that will make sure they last for longer without becoming rusty easily. They must also be able to withstand high amounts of force.

Deck Blade

 

 

The main part of a lawnmower's cutting blade. It is encased in the casing, which is known as a deck and comes in various shapes, sizes and types. Each one has its own specifications and needs to be able cope with high-speed contact with grass, as well as other things.

Standard blades are curved and raise the grass in a scissor like action. The curve of the blade also assists in dispersing clippings. The blade is not as powerful than a high lift blade and can be used on sandy or dusty terrain.

The cylinder blades, also known as reel blades consist of three to seven helical blades, which are then welded to form a rotating cylinder reel. They're used on reel or gas-powered mowers. These are the most common type of mower blade, and are also simple to replace. Many hardware or lawn-care stores will make the blades more balanced and sharper for a small cost.

Standard Blade

 

 

The most commonly used blade on lawn mowers is the flat blade. It is made to cut grass, however, it does not come with particular features, such as mulching or bagging. It has a low suction capacity and can be used on all kinds of grass.

The blades of high-lift blades have been angled so that they maximize airflow. This causes vertical suction which draws the grass towards the deck of your mower. This gives the perfect look for your lawn. The blades are also able to mowing on sandy surfaces.

If you choose to utilize these kinds of mower blades be sure that the shear pin holes are aligned correctly with the hole for the center bolt in the mower. The blade won't sit properly against the boss if not aligned correctly. This can lead to the blade wearing away quicker than you would expect. It is recommended to check the shear pin locating holes with your mower's manual for operators or parts list to ensure that the holes are properly fitted.

Lifting Blade

 

 

These blades are able to recirculate air, reducing the amount of the likelihood of clogging on the mower deck, while still delivering a high-quality cut. The inward curved blades create the impression of a vacuum, which allows the grass to rise and delivers it with a bagging or side discharge system.

The lifting power of these blades can also improve the quality of the cut when used on longer grass which is where a less lift blade might struggle to get an uniform cut. Furthermore, they are perfect for those who prefer to mulch their lawn trimmings. They can be used with either the 2-in-1 or 3-in-1 blade.

They are only an issue if have a lawn mower with an engine that is strong. These blades are not suitable for use on dusty or sandy surfaces where sand, grit, and other debris can cause the deck to degrade faster.

Mulching Blade

 

 

The blade is a popular alternative for those who do not make use of bags. It permits clippings left by your mower to be discharged through the discharge chute. With larger "wind wings" that are larger than the ones found on the standard lawn mower blades, they create an efficient airflow under the grass clippings to ensure they aren't thrown in the air. They can safely be ejected from your mower.

Check increase the sharpness of your mower blades bevel of the blade that mulches your lawn mower to make sure it is properly installed. The bevel is the angle which cuts across the edge of the blade. It should be pointing down when you are mowing. The blade's sharp edges could cause damage to your mower's deck if it is not installed correctly. Also, make sure it's not bent at an odd angle. This could make it ineffective when cutting taller grass. This is usually an indication of a damaged blade.